nconfig dump

Name

nconfig dump -- Diagnostic dump output

Synopsis

nconfig dump

Arguments

This command takes no arguments.

Description

This command outputs a diagnostic dump of all the configuration data in the store.

Note: This command is not present by default. It may be configured in, with the CYGSEM_REDBOOT_CONFIGSTORE_DUMP_CMD option.

Caution

This command can generate excessive amounts of output, which may take a long time to send over a slow debug channel.

Note: While this command outputs byte arrays in hex, they are not line-wrapped.

Examples

RedBoot> nconfig dump
Store serial number 52: 
  app1.magic=This is a string
  nand.partition1.size=200
  nand.partition1.base=16
  ecos.fakeflash.config=00100000cefaad0b 010c0100626f6f74 5f73637269707400 000000000411010c626f6f745f7363 726970745f646174 6100626f6f745f73 637269707400000000000000000000 0000000000000000 0000000000000000 000000000000000000000000000000 0000000000000000 0000000000000000 00000000000000
0000000000000000 0000000000000000 0000000000000000 000000000000000000000000000000 0000000000000000 0000000000000000 00000000000000000000000000
 (Ends)
RedBoot>

2017-02-09
Documentation license for this page: Open Publication License