NAND manipulation commands

Table of Contents
nand list -- List NAND devices
nand info -- Output information about a NAND device
nand badblocks states -- List all current valid BBT states
nand badblocks summary -- Summary of the Bad Block Table
nand badblocks list -- List not-OK blocks in a Bad Block Table
nand badblocks mark -- Manipulate the Bad Block Table
nand erase -- Erase an entire NAND partition
nand eraseblock -- Erase a specific NAND block

Note: These commands are only available when there is at least one NAND driver configured.

Note: All the nand badblocks commands may be configured out simultaneously by turning off the CYGSEM_REDBOOT_NAND_BADBLOCKS_CMD option.

2017-02-09
Documentation license for this page: Open Publication License