The M5208EVBe platform HAL contains a simple test program which allows various aspects of the board to be tested.
m5208evbe (SPI and LED) Test
The m5208evbe program tests the SPI driver by checking for presence of the on-board M13192 ZigBee transceiver. It currently does no more than verify presence of the device. Also, depending on the setting of the JP16:13 jumpers the device will display some patterns on the on-board LEDs. If the jumpers are not present or the GPIO configuration for the platform does not have the TIMER pins T3:0 configured for GPIO the LED changes will not be seen.