fis read

Name

fis read -- Read flash area

Synopsis

fis read {-b mem_address} {-l length} {-f flash_address}

Arguments

NameTypeDescriptionDefault
mem_addressNumberAddress data should be written to. 
lengthNumberLength of data to be read. 
flash_addressNumberAddress in flash to read from. 

Description

This command is used to read data from flash to memory. This command is only present if a flash device does not support direct random access (for example an SPI NOR flash).

Examples

Read an area of flash into memory

RedBoot> fis read -b 0x0606f000 -l 0x1000 -f 0x00020000

2017-02-09
Documentation license for this page: Open Publication License