Test Programs

Name

Test Programs -- Details

Test Programs

The STM32F7XX-EVAL platform HAL contains some test programs which allow various aspects of the board to be tested.

Manual Test

The manual test is not built by default. The configuration option CYGPKG_HAL_CORTEXM_STM32_STM32F7XX_EVAL_TESTS_MANUAL should be enabled to allow the test to be built.

This program tests various aspects of the basic platform port, e.g. flashing LEDs, checking I2C device access and that the push-button GPIO operates.

2017-02-09
Documentation license for this page: eCosPro License