Test Programs


Test Programs -- Details

Test Programs

The STM32F429I-DISCO platform HAL contains some test programs which allow various aspects of the board to be tested.

Manual Test

By default the manual test is not built by default. The configuration option CYGPKG_HAL_CORTEXM_STM32_STM32F429I_DISCO_TESTS_MANUAL should be enabled to allow the test to be built.

This program tests various aspects of the basic platform port, e.g. flashing LEDs, checking I2C and SPI device access and that the push-button GPIO operates.

Documentation license for this page: eCosPro License