RedBoot User's Guide

Copyright © 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009 Free Software Foundation, Inc.

Copyright © 2004, 2005, 2006 eCosCentric Limited

Table of Contents (expand | collapse)

1. Getting Started with RedBoot
2. RedBoot Commands and Examples
- Introduction
- Common Commands
  - alias -- Manipulate command line aliases
  - baudrate -- Set the baud rate for the system serial console
  - cache -- Control hardware caches
  - channel -- Select the system console channel
  - cksum -- Compute POSIX checksums
  - disks -- List available disk partitions.
  - dump -- Display memory.
  - help -- Display help on available commands
  - iopeek -- Read I/O location
  - iopoke -- Write I/O location
  - gunzip -- Uncompress GZIP compressed data
  - ip_address -- Set IP addresses
  - load -- Download programs or data to the RedBoot platform
  - mcmp -- Compare two segments of memory
  - mcopy -- Copy memory
  - mfill -- Fill RAM with a specified pattern
  - ping -- Verify network connectivity
  - reset -- Reset the device
  - version -- Display RedBoot version information
- Flash Image System (FIS)
  - fis init -- Initialize Flash Image System (FIS)
  - fis list -- List Flash Image System directory
  - fis free -- Free flash image
  - fis create -- Create flash image
  - fis load -- Load flash image
  - fis delete -- Delete flash image
  - fis lock -- Lock flash area
  - fis unlock -- Unlock flash area
  - fis erase -- Erase flash area
  - fis read -- Read flash area
  - fis write -- Write flash area
- Filesystem Interface
  - fs info -- Print filesystem information
  - fs mount -- Mount a filesystem
  - fs umount -- Unmount filesystem
  - fs cd -- Change filesystem directory
  - fs mkdir -- Create filesystem directory
  - fs deldir -- Delete filesystem directory
  - fs del -- Delete file
  - fs move -- Move file
  - fs list -- List filesystem directory
  - fs write -- Write to filesystem
- Persistent State Flash-based Configuration and Control
- Executing Programs from RedBoot
  - go -- Execute a program
  - exec -- Execute a Linux kernel
3. Rebuilding RedBoot
- Introduction
  - Rebuilding RedBoot using ecosconfig
  - Rebuilding RedBoot from the Configuration Tool
4. Updating RedBoot
- Introduction
5. Installation and Testing

	Top	Next
		Getting Started with RedBoot

Documentation license for this page: Open Publication License

Copyright © 2003-2012 eCosCentric Limited

Privacy & Legal Statements