184.108.40.206 Assembler Directives
LOCdirective sets the current location to the value of the operand field, which may include changing sections. If the operand is a constant, the section is set to either
.dataif the value is
0x2000000000000000or larger, else it is set to
.text. Within a section, the current location may only be changed to monotonically higher addresses. A LOC expression must be a previously defined symbol or a “pure” constant.
An example, which sets the label prev to the current location, and updates the current location to eight bytes forward:
prev LOC @+8
When a LOC has a constant as its operand, a symbol
__.MMIX.start..datais defined depending on the address as mentioned above. Each such symbol is interpreted as special by the linker, locating the section at that address. Note that if multiple files are linked, the first object file with that section will be mapped to that address (not necessarily the file with the LOC definition).
LOCAL external_symbol LOCAL 42 .local asymbol
This directive-operation generates a link-time assertion that the operand does not correspond to a global register. The operand is an expression that at link-time resolves to a register symbol or a number. A number is treated as the register having that number. There is one restriction on the use of this directive: the pseudo-directive must be placed in a section with contents, code or data.
asymbol IS an_expression
sets the symbol asymbol to an_expression. A symbol may not be set more than once using this directive. Local labels may be set using this directive, for example:
5H IS @+4
This directive reserves a global register, gives it an initial value and
optionally gives it a symbolic name. Some examples:
areg GREG breg GREG data_value GREG data_buffer .greg creg, another_data_value
The symbolic register name can be used in place of a (non-special) register. If a value isn't provided, it defaults to zero. Unless the option --no-merge-gregs is specified, non-zero registers allocated with this directive may be eliminated by
as; another register with the same value used in its place. Any of the instructions CSWAP, GO, LDA, LDBU, LDB, LDHT, LDOU, LDO, LDSF, LDTU, LDT, LDUNC, LDVTS, LDWU, LDW, PREGO, PRELD, PREST, PUSHGO, STBU, STB, STCO, STHT, STOU, STSF, STTU, STT, STUNC, SYNCD, SYNCID, can have a value nearby an initial value in place of its second and third operands. Here, “nearby” is defined as within the range 0...255 from the initial value of such an allocated register.
buffer1 BYTE 0,0,0,0,0 buffer2 BYTE 0,0,0,0,0 ... GREG buffer1 LDOU $42,buffer2
In the example above, the Y field of the
LDOUIinstruction (LDOU with a constant Z) will be replaced with the global register allocated for buffer1, and the Z field will have the value 5, the offset from buffer1 to buffer2. The result is equivalent to this code:
buffer1 BYTE 0,0,0,0,0 buffer2 BYTE 0,0,0,0,0 ... tmpreg GREG buffer1 LDOU $42,tmpreg,(buffer2-buffer1)
Global registers allocated with this directive are allocated in order higher-to-lower within a file. Other than that, the exact order of register allocation and elimination is undefined. For example, the order is undefined when more than one file with such directives are linked together. With the options -x and --linker-allocated-gregs, GREG directives for two-operand cases like the one mentioned above can be omitted. Sufficient global registers will then be allocated by the linker.
The BYTE directive takes a series of operands separated by a comma.
If an operand is a string (see Strings), each character of that string
is emitted as a byte. Other operands must be constant expressions without
forward references, in the range 0...255. If you need operands having
expressions with forward references, use .byte (see Byte). An
operand can be omitted, defaulting to a zero value.
The directives WYDE, TETRA and OCTA emit constants of
two, four and eight bytes size respectively. Before anything else happens
for the directive, the current location is aligned to the respective
constant-size boundary. If a label is defined at the beginning of the
line, its value will be that after the alignment. A single operand can be
omitted, defaulting to a zero value emitted for the directive. Operands
can be expressed as strings (see Strings), in which case each
character in the string is emitted as a separate constant of the size
indicated by the directive.
The PREFIX directive sets a symbol name prefix to be prepended to
all symbols (except local symbols, see MMIX-Symbols), that are not
prefixed with :, until the next PREFIX directive. Such
prefixes accumulate. For example,
PREFIX a PREFIX b c IS 0
defines a symbol abc with the value 0.
A pair of BSPEC and ESPEC directives delimit a section of
special contents (without specified semantics). Example:
BSPEC 42 TETRA 1,2,3 ESPEC
The single operand to BSPEC must be number in the range 0...255. The BSPEC number 80 is used by the GNU binutils implementation.