This driver supports the FlexCAN CAN devices available in some
Freescale Coldfire and PowerPC microprocessors.
Filter
The device provides filtering support that is compatible with the
filter model defined by the CAN subsystem, and therefore hardware
filtering is employed.
Baud Rates
The following baud rates are supported: 1Mb/s, 800kb/s, 500kb/s,
250kb/s, 125kb/s, 100kb/s, 50kb/s, 20kb/s, 10kb/s.
Configuration
This driver requires an additional package to configure it to the
particular microcontroller. For each channel X
supported the CDL script in this package must provide the following
configuration options:
cdl_component CYGPKG_DEVS_CAN_CHANNELX
This defines whether the channel is included.
cdl_option CYGPKG_DEVS_CAN_CHANNELX_NAME
This defines the name of the channel.
cdl_option CYGNUM_DEVS_CAN_CHANNELX_BASE
This defines the base address of the CAN channel controller in the
memory map. It will typically be an expression involving HAL-defined
constants which resolves to the address of the the device.
cdl_option CYGNUM_DEVS_CAN_CHANNELX_VECTOR
This defines the interrupt vector associated with buffer 0. It is
assumed that the vectors for buffers 1..15 follow this, and that the
error and bus off interrupt vectors follow these. This will typically
be a HAL-defined constant.
