Address the image should be loaded to. Executable
images normally load at the location to which the file
was linked. This option allows the image to be loaded to
a specific memory location, possibly overriding any
assumed location.
If not specified, the address associated with the
image in the FIS directory will be used.
-c
Compute and print the checksum of the image data
after it has been loaded into memory.
-d
Decompress gzipped image while copying it from
flash to RAM.
name
String
The name of the file, as shown in the FIS
directory.
Description
This command is used to transfer an image from flash memory to RAM.
Once the image has been loaded, it may be executed using the
go command.
